Wall display toxic/explosive gas detector

 

Versatile toxic and combustible gas detector with flexible configuration options and multiple communications protocols

This is a versatile gas detector that utilizes flexible configuration options and multiple communications protocols to monitor and control toxic and combustible gases in commercial applications.

  • Accurate to ± 3%" of full scale @ 25º C
  • Detects CO, NO2, O2, H2, H2S, CH4 and C3H8
  • Provides real-time reading of gas values display
  • Activates horns, strobes or fans via two on-board relays
  • Utilizes plug-and-play sensor cartridge
  • Options include wall or duct mount; 120 VAC version
  • CAN/CSA-C22.2 NO. 61010-1; UL 61010 approve


Description: E3Point Product Image

Flexible Operation

  • Comes in standalone, standalone with remote (dual gas mode) or network versions
  • Connects to analog or digital systems
  • Works with virtually any BAS including BACnet, Modbus or LonWorks*
  • Connects to wired or wireless system (via 301CW wireless controller)
  • Wall or duct mount
  • Factory-calibrated cartridges

Cost Effective

  • Saves energy through Demand Control Ventilation (DCV)
  • Simplifies installation/maintenance through plug-and-play sensor
  • Remote sensor option provides dual gas monitoring (standalone version only)
  • Optimizes BAS, fire, ventilation and other security systems

Versatile Communications

  • Works through BAS to improve fault diagnostics and collect data on gas concentation levels, sensor condition, etc.
  • Couple with 301C to log data and daisy-chain up to 96 wall display units

Advanced Sensing Technology

  • Detects CO, NO2, O2, H2, H2S, CH4, C3H8
  • Advanced electrochemical (for toxic gases) and catalytic bead (for combustible gases) sensor performance
  • Uses patented Reflex® and smart cartridge technologies

Description: ation Image

Energy Management

Wall display E3 offers green benefits for new and retrofitted buildings. It reduces energy consumption through DCV (Demand Control Ventilation), and can be integrated with a building automation system or coupled with a controller (VA301C) to obtain additional energy savings through zoning or optimized HVAC control.

Efficiency

Wall display E3 uses a single platform for detecting combustible and toxic gases, combines smart sensor design with plug-and-play ease, operates in extreme indoor or outdoor conditions, and offers many other practical advantages that help your building perform at peak efficiency.

Economical Value

Ultimately, Wall display E3 boosts your building’s bottom line performance and capital value. Its unrivaled flexibility and ease of use reduces installation, operation and maintenance costs. Whether you require a standalone application for a small commercial building or a networkable solution for a sophisticated complex using a mix of wired-wireless systems, wall display is the intelligent choice.


Single-Gas Standalone Wall display Monitoring

Description: App List 
Description: E3Point Application Image

Low-cost solution for monitoring CO, H2S, NO2, O2 and combustible gases in virtually any building room, area or outbuilding

  • Provides real-time reading of gas values on Wall display E3
  • Activates horns, strobes or fans via two on-board relays
  • Protects in extreme temperatures (operating range: -40 to 122º F/-40 to +50º C)
  • Cuts installation & service costs with plug-and-play sensor cartridge
  • Options include wall or duct mount; 120 VAC version
  • CAN/CSA-C22.2 NO. 61010-1; UL 61010 approved

Dual-Gas Standalone Wall display E3 Monitoring

Description: App List 
Description: E3Point Application Image 
Economical solution for monitoring two gases simultaneously in various combinations (toxic-toxic, toxic-combustible, toxic-oxygen)

  • Provides two relays, local alarm and onboard buzzer
  • Displays gas data from both monitoring units on base unit LCD
  • Enables viewing of gas values from remote sensor on base unit LCD
  • Drives horns, strobe or fans via two relays (standard)
  • Protects in extreme temperatures (operating range: -40 to 122º F/-40 to +50º C)
  • Cuts service costs with plug in cartridge/easy sensor exchange
  • CAN/CSA-C22.2 NO. 61010-1; UL 61010 approvals

Wall display E3 /Wired-Wireless Configuration

Description: App List 
Description: E3Point Application Image

Wall display E3 shares a common controller (301CW) with wireless gas detectors (301W) to enhance HVAC controls system

  • Integrates with BAS and multiple systems (HVAC, smoke, other security systems) to provide a single platform to optimize energy management, building efficiency and economical value
  • 301CW controller provides local display, datalogging and additional relays
  • Single on-board delay
  • Optional relay output activates fans directly instead of through BAS
  • Connection to large data storage and on-line computers allow for advanced energy-saving measures (remote resets of gas monitoring equipment, ventilation system monitoring, preventive maintenance, energy auditing, efficient bookkeeping)
  • CAN/CSA-C22.2 NO. 61010-1; UL 61010 approved


Wall display/Modbus Configuration

Description: App List 
Description: E3Point Application Image 
Cost-effective solution for augmenting a gas monitoring system using RS-485 Modbus interconnection to a central controller (301C) or BAS

  • Daisy-chains gas monitors on a serial bus to provide up to 96 points of monitoring via one controller (301C)
  • Integrates with BAS to multiple systems (DCV/HVAC, smoke, swipe, surveillance) to optimize energy management, building efficiency and economical value
  • Provides second local display, datalogging and additional relays through 301R8
  • Adds extra control through addressable relay module
  • Cuts energy use and costs through selective ventilation operation
  • Offers optional 110VAC power, display, duct mount kit and horn/strobe
  • Adds dual-monitoring through always-on remote sensor
  • Can activate fans directly (via relays) or through controller
  • CAN/CSA-C22.2 NO. 61010-1; UL 61010 approved

Wall display/BACnet (MS-TP) Configuration

Description: App List 
Description: E3Point Application Image 
Wall display outputs directly to a BAS without an intermediary device

  • Integrates with multiple systems (HVAC, smoke, other security systems) to optimize energy management, building efficiency and economical value
  • Manages several buildings through one cost-effective, flexible system
  • ctivates alarms, strobes, horns and fans through DCV/HVAC controls or directly from Wall display E3 via on-board relay
  • Facilitates energy savings through scheduled programming (start/stop) or selective activation of ventilation, louvers, etc. (when alarm set-points are exceeded)
  • Supports new and retrofit installations with wireless and wired components
  • Daisy chain multiple Wall display E3 Monitors
  • CAN/CSA-C22.2 NO. 61010-1, UL 61010-1 approved

Accesories

Description: Strobe / Buzzer

Description: Sensor Cartidge

Description: Tamper-Proof Screws

Description: Duck Mount Kit


 

 

Location

Ask about this product