You have 0 items in your cart.
By Brands
Tenmars
Sub Categories
Category:
LAN Cable Tester
Model No.: : LC-90 Product Description - LCD display. - Test pin configuration for 10/100 base-T cable, 10 base-2 cable, RJ45/RJ11 modular cables, AT and T 258 A cable, EIA/TIA 568A/568B cables and Token Ring Cables etc. - Verify cable continuity, opens, shorts and miss-wired. - Auto and manual scan function. - Ground wire test. - Locked status wire function. - Detected defective wire warning (buzzer). - Function Keys: ON/OFF, Test, Auto, Lock, Manual. - Low battery indication.
Category:
Insulation Tester
Model No.: : TM-507 Product Description EN 61557, EN 61010-1 CAT IV 600V 4 digit LCD display. Automatic Polarity Indication. Low battery indication. Measures high insulation resistance with auto range: 250V: 4MΩ to 1000MΩ. 500V: 4MΩ to 2000MΩ. 1000V: 4MΩ to 4000MΩ. Measures AC and DC voltages: 0V to 600V. Function Keys: POWER, GO, ZERO, LOCK, BACKLIT. Continuity Test. Auto Discharge. Auto Power Off.
Category:
Insulation Tester
Model No.: : YF-509 Product Description 3-1/2 digit LCD display with maximum reading of 2000. Overload indication. Low battery indication. Measures high insulation resistance manual range: 0.1MΩ to 2000MΩ 250V: 0.1MΩ to 200MΩ. 500V: 0.1MΩ to 200MΩ. 1000V: 1MΩ to 2000MΩ. Measures AC 0 to 750V and DC voltages 0V to 1000V. Function Keys: Data Hold, Max. Continuity Test.
Category:
EMF/ RF Field Strength Meter
Model No.: : TM-196 Product Description - Measurement range: 38mV to 20V/m - Frequency range: 10MHz~8GHZ. - Sensor: Triple Axis (X, Y, Z). - Manual data memory (Max & AVG) records. - Calibration factor, Alarm and Clock settings.
Category:
EMF/ RF Field Strength Meter
Model No.: : TM-195 Product Description - RF range: 38mV to 20V/M - Frequency range: 50MHz to 3.5GHz. - Sensors: Triple Axis (X, Y, Z) - Manual data memory (Max & AVG) records. - Calibration factor, Alarm and Clock settings.
Category:
EMF/ RF Field Strength Meter
Model No.: : TM-194 Product Description - Ranges: 2.45 GHZ (microwave frequency) or 50MHZ~3.5 GHZ. - RF power density: 0.01~2.700m W/cm2. - Data hold (HOLD). - Maximum (MAX) Hold. - Minimum (MIN) Hold. - Zero function. - Build in alarm setting. - Low battery indication. - Overload indication.
Category:
EMF/ RF Field Strength Meter
Model No.: : TM-192_TM-192D Product Description - Frequency response: 30Hz to 2000Hz. - Sensor: Triple Axis (X, Y, Z). - Range: 20/200/2000 mG,2/20/200μT. - Data hold (HOLD). - Maximum hold (MAX). - Minimum hold (MIN). - TM-192D is built in the USB datalogger with the capacity of 500 data sets or 9999 data sets.