SEW-Taiwan
SEW New
Sub Categories
● Measures positive polarity DC voltages up to 40kV.● Lightweight and rugged.● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.
● Measures both AC and DC voltages with digital multitester.● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.● Lightweight and rugged.● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.
● Measures both AC and DC voltages with oscilloscopes.● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.● Lightweight and rugged.● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.
● Measures both AC and DC voltages with digital multitester.● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.● Lightweight and rugged.● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.
● No user’s assembled parts.● Dual color-coded scale (%, Vac).● Neon indicator when >1200Vac.● Lightweight, robust & compact.● Carry case included.● Compare between phases.● Measure and test phase to earth.● High quality fiberglass wound rod.● Self powered operation. No battery required.● DC version available.● Measure phase to phase.● Hi immunity to interference fields.● Suitable for indoor and outdoor use.● Current is limited to ±1 milli-ampere.● Grounded or ungrounded systems.● Meets IEC 61481 (excludes PC44K).
FEATURES ● No batteries required.● Every circuit is doubled.● Buzzer indicates voltage detected.● Led indicates voltage detected.● Neon scale indicates voltage.● Dual HBC fuses.● High grade fiber glass probes.● Super polished fiber glass.● High strength connecting cord.● Heavy duty rated.● Replaceable tips.● Choice of tips available.● Lightweight.● Small storage space.● Strong strength reliefs.● Double poles non-polarized.● Suitable for 45 to 70 Hz networks.● Contact detector type.● Passive circuitry.● Fiber glass 1.6mm - CU 35um PCB.● Super bright neon lights and LEDs.● Ergonomically-designed.● EN 61010-031 CAT IV 500V. SPECIFICATIONS GENERAL Maximum Rating between Poles 450V Category IV FUSES Type HBC/HRC Rate of Rupture Slow Blow Current Rating 500mA Voltage Rating 600V Quantity 2 VOLTMETER The Neon Voltage Scale Indication Neon lit when Voltage > or = 110V Neon lit when Voltage > or = 220V Neon...
FEATURES ● Microprocessor-controlled smart voltage detector.● Bright LED and audible alarm sound when voltage is present.● Designed for non-contact voltage detection.● Sensitivity adjustable with thumbwheel.● Adjustable for use on power wiring plus lighting, thermostats and other low voltage circuits.● LED indication for battery condition.● Identify Hot and Neutral. SPECIFICATIONS Voltage detection 50V~1000V AC Frequency 50~500 Hz Measurement category CAT IV 1000V Indication LED and Tone Operating conditions Temperature : 0~40°C Humidity : Less than 80% R.H. Altitude : 2000m maximum For indoor use only ˇ Pollution degree 2 Dimensions 142(L) × 28(W) × 27(D)mm Weight (battery included) Approx. 39g Power source 1.5V (AAA) × 1 Safety standard EN 61010-1 CAT IV 1000V EN 61326-1
FEATURES ● Bright LED and audible alarm sound when voltage is present.● Designed for non-contact voltage detection.● Can be used to find a break in a wire.● Flashlight function.● ON/OFF switch for longer battery life. SPECIFICATIONS Voltage detection 50V~1000V AC Frequency 50~500 Hz Measurement category CAT III 600V Indication LED and Tone Operating conditions Temperature : 0~40°C Humidity : Less than 80% R.H. Altitude : 2000m maximum For indoor use only ˇ Pollution degree 2 Dimensions 142(L) × 28(W) × 27(D)mm Weight (battery included) Approx. 45g Power source 1.5V (AAA) × 2 Safety standard EN 61010-1 CAT III 600V EN 61326-1