Multi-Trans
How to Use
Clamp your instrument around the pick-up coil of the multi-tran.
Then, clamp the transformer jaws of the multi-tran on the conductor, as shown below.
Multiply the reading of your clamp meter by 10 to obtain the current value measured.
Measuring Range | 0~3000A AC |
Ratio/Range | 10 : 1 (input to output) |
Accuracy | |±2% of input±0.5A |
Allowable Measurement Time |
0~1000A (continuous), 1000~1500A (10 minutes max.) 3000A (30 seconds max.) |
Conductor Size | Ø100mm max.(100 × 150mm) |
Frequency Response | 50Hz/60Hz |
Safety Standard | IEC61010-1 CAT.III 300V Pollution Degree 2 |
Withstand Voltage | 3000V AC for 1 minute |
Dimensions | 317(L) × 150(W) × 30(D)mm 45(L) × 40(W) × 10(D)mm Output coil |
Weight | 750g approx. |
Accessories | 9056(Carrying Case) |
For use with following models * |
2002PA, 2002R, 2003A(AC only), 2004(AC only), 2006, 2007A(AC only), 2009R(AC only), 2017, 2027, 2031, 2033(AC only), 2037(AC only), 2040(AC only), 2046R(AC only), 2055(AC only), 2056R(AC only), 2412, 2417, 2431, 2432, 2433, 2433R, 2434, 2608A, 2805, 8113(AC only), |
* These Multi-Trans can not be used for leakage current measurement.